I started work in the workshop at 8.30am, I started by pocket holing all the drawer panels, because I decided to use 18mm for the bases as well, they had to be assembled so that they would not fall apart. Once I had them all done, it was a case of glue and screw! LikeContinue reading “Getting There!”
Tag Archives: drawer fronts
Bedside Tables…Finished!
I started early today, the first job was preparing the drawer fronts, I decided that because they are recessed it would not have looked right, to route the edges, I sanded them up to 320 grit, then drilled and fitted the handle screws in place. They then had a coat of varnish, and were leftContinue reading “Bedside Tables…Finished!”