Saw-Horses!

I have some work to do at my Mother in law\’s house, and need to take my tools between here and there, but I don\’t want to have to take my trailer unless it is necessary, one of the things I will need are saw-horses.

I therefore decided to make two folding saw-horses, I found the plans on woodshopdude.com, but made several changes to the design, making them smaller, but chunkier.

I started off by cutting the parts from 2×4, and the rails I cut down from 1x8s, all scrap left over from other projects.

I then started assembly, I didn\’t have any 4\” carriage bolts, so for now I have used 1/2\” threaded rod, if that doesn\’t work out I can always change it later.

To use the saw-horse you open it up, and place a 2×4 beam,  the length depending on your needs, in the cutout.

Now I just have to get some rope, to hold it in position, and stop it splaying out altogether. With the top beam being removable, the saw-horse can be adapted for various uses, as I make them, I will post the details.

Published by Phil Sale

I moved to Colombia from Spain in 2012, and I am happily married to a Colombiana.

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s

%d bloggers like this: